For use in signal distribution systems to split the amplified signal to up to 4 antennas with minimal signal loss. Weatherproof case for indoor or outdoor use. Our standard units are offered with N/Female connectors and are capable of handling 10W of power into a matched load. These units are ideal for in-building applications that require the combining or dividing of RF to accommodate multiple antenna locations. This 2-way splitter allows you to drive two interior antennas from a single amplifier/repeater. Because you are splitting the signal each antenna will receive approximately 1/2 of the signal which equates to about 70% of the coverage distance when compared to driving a single antenna. Connecting splitter to amplifier: Typically the splitter is connected to the amplifier using the 2' 9913 coax extension but any length of 9913 cable may be used. Connecting antennas to the splitter: The 301121 Wilson Cellular Dual-Band Ceiling Mount Dome antenna and 301122 - Wilson Cellular Dual-Band Directional Panel Antenna must be connected to the splitter using 9913 cable Other Wilson Electronics antennas may be connected directly to the splitter using either the N/Male to FME/Male adapter or using a length of 9913 cable.

Specifications:
Signal Reduction: 3.5dB
Connectors: N/Female