>HD24278 2.4GHz Hi-Power Wireless Outdoor Bridge Bundle

"We're in a very competitive environment here in Utah with at least 7 other competitors in the areas that we service so we see a huge amount of spectrum garbage and the Tranzeo radios have handled it gracefully. We also live in an area that sees 105 degrees in the summer and -40 degrees in the winter. Of course there have been problems but one of Tranzeo's best qualities is that they are always quick to respond when there's a problem and they get someone working on it right away. We've never had more than a few hours downtime through lightning strikes, subzero temperatures and just about anything else that you can think of."

Jamie Locke
Park City, UT

HD24278
Hi-Power 2.4GHz Wireless Outdoor 802.11b 5-Mile Bridge Bundle

Wireless Outdoor Bridge Bundle Kit featuring two Tranzeo 2.4 GHz 802.11b outdoor radios. Includes:

one Tranzeo (HD24126) AP/CPE/PtP unit with 26dBm/400mW radio, N-connector, 1-foot cable, 14dBi directional antenna, PoE, mounting brackets.
one Tranzeo (HD23588) CPE unit with 23dBm/200mW radio, 19dBi integrated antenna, PoE, mounting brackets.

This bundle will bridge a distance up to 5 miles (LoS*).

Wi-Fi Protected Access (WPA)

WPA improves on the security features of WEP. It includes improved data encryption and user authentication.

Network Management

Simple Network Management Protocol (SNMP) support.

All New Access Point Features: Wireless Distribution System (WDS)

WDS allows Access Points to wirelessly bridge each other while also servicing clients. Perfect for hotspots.

• Multiple MAC Bridge Support

• DHCP Client

• Adjustable RTS/CTS settings

• Outdoor CAT5 Connector

• Power over Ethernet (PoE)

•	Web Management
•	Remote Management & Remote
•	Grounding Post for easier
•	Transient Discharge Protection (Tested to 2200 volts)

Not all channels approved for use in all areas.

Allow us to do the grunt work for you. Let us pre-configure the wireless devices in this bundle. Installation for you will be as simple as "Plug N Play." Please see HD23566 for more details on our pre-configuration services.

Radio Features:

Standard

802.11b

Frequency Range

2401 MHz to 2483.5 MHz

Radio Mode:

Access Point

Client

Access Point / Point to Point / Customer Premise Equipment

Station Adapter Infrastructure

Data Range & Modulation

11 Mbps & 5.5 Mbps CCK, 2 Mbps DQPSK, 1 Mbps DBPSK

Communication Method

Half-Duplex

Transmit Power:

Access Point

Client

+26dBm max

+36dBm EIRP

Receiver Sensitivity:

Access Point

Client

-85dBm @ 11Mbps, -90dBm @ 1Mbps

-89dBm @ 11Mbps

Polarization

Horizontal or Vertical

Antennas:

Radio	Type	Wind Load (N)		Beamwidth
Radio	Type	100 mph	125 mph	Horizontal	Vertical
Access Point	14dB Panel (External)	100	160	30°	30°
Client	19dB Panel (Internal)	100	160	20°	33°

Management:

Remote Configuration

Based on IP Address

Device Management

Windows Utility, Web-Based Management

Protocol Supported

TCP/IP

Security

40 bits and 128 bits WEP encryption
(because the CPE does not support WPA, WPA is unavailable in this bundle)

Ethernet Connector

10/100 base T (Water Tight RJ-45)

Operating Temperature

-55°C to +70°C

Warranty

1 Year Depot

Dimensions:

Access Point

Client

13" X 10-1/8" (radio only)

13" X 10" (radio only)

Power Supply:

Standard

AC Wall Plug
Input: 120V 60Hz
Output: 18V, 1000mA

Optional

AC Wall Plug
Input: 120V 60Hz
Output: 24V, 1000mA

Samlex Switching Power Supply (only on AP)
Input: 120V 60Hz
Output: 24V, 7A

Click here for Access Point product installation manual (.pdf)
Click here for Client product installation manual (.pdf)

Specifications are subject to change without notice
Subject to local regulations

*LoS (Line of Sight): Absolutely no obstructions between these two radios (no trees, terrain, buildings or structures). The AP and the Client radios in this bundle must physically see each other.