>HD24870 Non Line of Sight (NLoS) WISP 2.4GHz 200mW AP Bundle

"We're in a very competitive environment here in Utah with at least 7 other competitors in the areas that we service so we see a huge amount of spectrum garbage and the Tranzeo radios have handled it gracefully. We also live in an area that sees 105 degrees in the summer and -40 degrees in the winter. Of course there have been problems but one of Tranzeo's best qualities is that they are always quick to respond when there's a problem and they get someone working on it right away. We've never had more than a few hours downtime through lightning strikes, subzero temperatures and just about anything else that you can think of."

Jamie Locke
Park City, UT

HD24870
Non Line of Sight (NLoS)* WISP 2.4GHz 200mW AP Bundle
Keeps the active electronics indoors. No need to climb a tower if you have a radio problem.

This bundle includes:

one (1) Tranzeo TR-600 2.4GHz indoor 200mW AP
one (1) circular-polarized 10dBi flat panel antenna (70° beam width)
one (1) mounting arm (for antenna)
one (1) 20-foot LMR-400 coax
one (1) 5-foot LMR-195 coax
one (1) lightning arrestor

Tranzeo is pleased to announce their all new TR-600f Series 2.4 GHz radio. These integrated fully functioning radios can be configured as an Access Point, a Point to Point bridge, or a Client Adapter (CPE).

Overall Features: Controllable High Gain Output

Radios have between +23dBm and +27dBm maximum output, depending on model. Great for long distance client applications. Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

Dual Ethernet Ports

This allows you to daisy-chain radios at your installation sites (depending on power requirements). Great for installing peripheral Power over Ethernet devices like weather monitoring or security cameras.

More Robust Routing Features: Tunneling Protocol Support

Includes support for tunneling protocols such as VPN, PPTP, RSA, etc.

Low Power Requirements

Excellent for solar and other alternative power source installations. TR-600f Series requires only 7 Watts.

All New Access Point Features: Wireless Distribution System (WDS)

WDS allows Access Points to be wirelessly connected to each other while also servicing clients.

Wi-Fi Protected Access (WPA)

WPA improves on the security features of WEP. It includes improved data encryption and user authentication.

WPA and WEP LEDs

Outside LEDs allow you to easily see if WEP or WPA is activated on your Access Point.

All New Client Adapter (CPE) Features: Alignment LEDs

Now you can align your client and point to point installations without having to log into the radio. Get visual signal strength at a glance by using this great new feature.

Not all channels approved for use in all areas.

Features (AP radio):
Standard	802.11b
Frequency Range	2401 MHz to 2483.5 MHz
Radio Mode	Access Point / Point to Point / Customer Premise Equipment
Data Range & Modulation	11 Mbps & 5.5 Mbps CCK, 2 Mbps DQPSK, 1 Mbps DBPSK
Communication Method	Half-Duplex
Transmit (Output) Power	+23dBm max
Receiver Sensitivity	-85dBm @ 11Mbps, -90dBm @ 1Mbps
Polarization	Horizontal or Vertical

Management (AP radio):
Remote Configuration	Based on IP Address
Device Management	Windows Utility, Web-Based Management
Protocol Supported	TCP/IP
Security	40 bits and 128 bits WEP encryption, Media Access Control address filter (MAC), WPA
Ethernet Connector	10/100 base T (Water Tight RJ-45)
Operating Temperature	-65°C to +60°C
Warranty	1 Year Through Manufacturer*
Dimensions	7-3/4" x 4-1/4" x 1-1/2" (radio only)
Connector	RP-TNC or N-Type Pigtail


Power Supply:
Standard	AC Wall Plug Input: 120V 60Hz Output: 18V, 1000mA
Note: This device requires one power supply. Use PoE or supplied DC adapter. Ports A and B are PoE enables. *Applies to trees (except pine trees). Does not apply to buildings, steel structures or terrain.