301124, The Wilson Yagi Cellular Antenna is carefully designed to minimize loss and maximize gain on the 1900 MHz band. Wilson's innovative design results in high efficiency with low losses and will get the most signal to and from your cellular phone.

301124, Wilson Yagi Cellular Antenna 1900 MHz (Wilson Part# 301124)


The 17" boom is the main part of the antenna, and is constructed of 1" sqaure aluminum. There are 8 elements on the boom, which are riveted to the boom for added strength and durability.

The output coaxial connector is an "N" type female, and the feed system is a "T-Match" and is used for low loss and wide bandwidth. The antenna impedance is 50 Ohms, with 50 Watts of Max Power.

The pipe mount hardware is included with the purchase of a Wilson Cellular Antenna. The pipe mount is adjustable to accommodate pipe diameters from 1/2" to 2".

See below for additional specs.

Wilson 1900 MHz Yagi PCS Cellular Antenna (#301124)

The Wilson Yagi Outperforms the Competition.
Over 10 Times More Signal Than A Cellphone Without An External Antenna!

Wilson Yagi Cellular Antennas are very effective at increasing your cell phone's signal strength in rural areas. The Yagi is a directional antenna and should be mounted above tree lines and aimed directly at your service providers nearest cell tower. It is a single band (1850-1990 MHz), high-gain directional cellular antenna designed for fixed installations.

The Wilson Yagi Cellular Antenna is carefully designed to minimize loss and maximize gain on the 800 MHz band. Wilson's innovative design results in high efficiency with low losses and will get the most signal to and from your cellular phone. Thanks to our top notch engineering team and attention to detail Wilson has the best 800 MHz Yagi cellular antenna available.

Usage:
The Wilson Yagi Cellular Antennas main benefit over our other antennas is its ability to focus its signal in one direction. This antenna is designed for use on stationary objects such as buildings. If this antenna is not aimed correctly it will loose its effectiveness.

Click here for installation instructions.


Specifications
Electrical Properties
Frequency Range 1850-1990 MHz
Impedance 50 Ohms
Antenna Gain 13 dBi
Max Power 50 Watts
Radiation Directional
Polarization Vertical (36 degrees) or Horizontal (40 degrees)
Ground Plane Built in Ground Plane
Mechanical Properties
Elements 8
Connector N-Female
Material Aluminum
Length 17" (43 cm)
Mount Mounts on pipe (w/ .5" to 2" diameter) using included U-bolt mounting bracket

"...I often had no signal and dropped calls. Now my signal has drastically improved. I once broke down in Baker, CA and had to walk to call for help because there was no signal. Now I get signal all the way through Baker. I don't have to talk loud anymore hoping to be heard. My dispatcher loves the antenna as well because now he can get the information he needs from me." - Trucker Ronald Goetter from Tucson, AZ

"It's tremendous! I'm so happy with this unit. I don't know how you could make it any better. I will never be without a Wilson Antenna again, ever! I never knew a cell phone could be so clear. After three years of fighting to make calls I'm talking from areas in North Carolina that I've never been able to talk to anyone from before and we've talked for miles." -Trucker Jim Fritzgerald from Palm Harbor, FL

"Your antenna works! It's fantastic! I can even use my phone in a remote area in Arkansas that I could never get coverage in. My run from Kansas City to Carthridge, Kansas used to have poor coverage, now I have coverage all the way through." -Trucker Leonard Miller from Carthridge, KS


Click To Enlarge
Wilson Yagi Installation (see Figure 2)

The Yagi antenna is to be mounted horizontally with the radials vertical. The included mounting brackets are adjustable and will accommodate pipe diameters from 1/2 inch to 2 inches. (Pipe not included). The Yagi antenna should be mounted to minimize obstructions between the antenna and your provider's strongest signal.
Caution:

  • Lightning protection is recommended for all installations (#859902).
  • Take extreme care to ensure that neither you nor the antenna come near any electric power lines.

To obtain maximum performance, you must "tune" the antenna (see Figure 3). This is done by directly connecting the Yagi to your cellphone, while in test mode, with an adapter (sold separately, see below). Turn the Yagi in 10 degree increments while checking the cellphone's signal level. At each point you may need to wait a few seconds as your phone updates. To find your phone's test mode, click HERE. Signal readings are given as a negative number (example -86). The larger the number the more powerful the signal (-75 is stronger than -84).

Important: After finding the strongest signal, be sure the Yagi is not pointing across the coverage area. The antenna should point away from the building to help prevent oscillation (feed back).
Note: Your strongest signal may not be in the direction of the nearest tower

Click To Enlarge


Click To Enlarge
Once you have obtained the strongest signal (left), fully tighten the mounting hardware. After the entire system is installed and performing correctly, weatherproof all connections.
Attaching your Phone to the Adapter

In order to attach your cellular antenna to your cellphone you will need an Adapter. The Adapter connects the phone to the antenna cable and transfers power to and from the antenna.

Price: $49.95
Buy Product Online | Visit Store Home
 
Manufactured by Wilson Electronics, Inc.


 Other Items from Cellular Amplifiers

  HD22362 TNC Female/FME Female Barrel Adapter - 
  301119 Dual Band RV/Trucker Roof-Mount Cellular Antenna - 301119 The included mounting hardware is designed to span roofs with large gaps such as the attics found in most RV's.
  804002 Wilson Cellular Wireless Amplifier For Cars, Trucks & RVs; 804002 - 804002 Bi-Directional Amplifier/Repeater For Cars, Trucks & RVs (Nextel/iDEN Frequencies 806-866 MHz).
  814001 Wilson Cellular Direct Connect Nextel Amplifier - 814001 The Wilson Cellular Amplifier has a better receiver than what's in your cell phone. Its advanced electronics are very sensitive and able to receive small signals which would go undetected by most cell phones. It also has a better transmitter which is much more powerful than that in you cell phone.
  301106 Wilson Low Profile Cellular Antenna - 301106 The Wilson Low Profile Cellular Antenna is carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson's innovative design results in high efficiency with low losses and will get the most signal to and from your cellular phone.
  301111 Wilson Yagi Cellular Antenna 800 MHz - 301111 The Wilson Yagi Cellular Antenna is carefully designed to minimize loss and maximize gain on the 800 MHz band. Wilson's innovative design results in high efficiency with low losses and will get the most signal to and from your cellular phone.
  811201 Wilson Cellular Direct Connect Dual Band Amplifier; 811201 - 811201 The Wilson Cellular Amplifier has a better receiver than what's in your cell phone. Its advanced electronics are very sensitive and able to receive small signals which would go undetected by most cell phones. It also has a better transmitter which is much more powerful than that in you cell phone.
  801101 Wilson Bi-Directional Amplifier/Repeater For Cars, Trucks & RVs - 801101 This Wilson Bi-Directional Amplifier/Repeater greatly improves signal strength inside a vehicle without a physical connection to your cellular phone. Increasing coverage up to 50 miles or more (37dB), it even allows mulitple phones to be used simultaneously.
  859901 Wilson Dual-Band 2-Way Splitter - 859901 The Wilson Dual-Band 2-Way Splitter allows you to drive two interior antennas (up to 4 using multiple splitters) with a single amplifier/repeater
  859903 Wilson AC Power Supply Adapter; 859903 - 859903 120VAC Adapter For Wilson Cellular Amplifiers
  859904 12V DC Power Supply for Wilson Mobile Amplifiers; 859904 - 

 

  Return To www.hdwifi.com- Wireless Network Products WiFi Gear, 802.11, WISP, WLAN

 

 

e-commerce solutions
Shopping cart powered by MonsterCommerce ecommerce software.