Canopy Access Point Cluster and Cluster Management Module Canopy Subscriber Module 5200SM 25 Pack
Operating Frequency Range U-NII Mid band	5.25 to 5.35 GHz
Access Method	TDD/TDMA
Signaling Rate	10 Mbps
Modulation Type	High Index BFSK (Optimized for interference rejection)
Carrier to Interference (C/I)	3dB 10 -4 BER @ -65 dBm
Receiver Sensitivity	-83dBm 10 -4 BER
Operating Range (all weather)	Up to 2 miles with integrated antenna in the 5.2 GHz band.
Transmitter Power	Meets FCC UNII ERP Limit
DC Power	24 VDC @ 0.3 Amp (active state)
Interface	10/100 BaseT, half/full duplex Rate auto negotiated (802.3 compliant)
Protocols Supported by CANOPY	Switched Layer 2 Transport with support for all common Ethernet protocols including IPV6, NetBIOS, DHCP, IPX, etc.
Protocols Used by CANOPY	IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP
Software Upgrade Path	Remotely downloaded into FLASH via RF link
Network Management	HTTP, TELNET, FTP, SNMP
Wind	190 km/hr (118 miles/hr)
Operating Temperature	-4C to +5C (-4F - +13F)
Weight	1 lb. (.45kg)
Dimensions	11.75" H x 3.4" W x 3.4" DÊ (29.9 cm H x 8.6 cm W x 8.6 cm D)