Canopy Access Point Cluster and Cluster Management Module Canopy 5.7 GHz Advantage Access Point Module 5750AP
Operating Frequency Range U-NII Mid band	5.725 to 5.850 GHz
Access Method	TDD/TDMA
Signaling Rate	20 Mbps Maximum
Modulation Type	High Index 2-level & 4-level Frequency Shifting Key (FSK) (Optimized for interference rejection)
Carrier to Interference (C/I)	3dB @ 10 Mbps, ~10dB @ 20 Mbps at -65dBm
Nominal Receiver Sensitivity (dbm typical)	-86dBm
Typical LoS Range	2 miles (3.2 km)
Typical Aggregate Useful Throughput	14 Mbps Maximum
DC Power	24 VDC @ 0.3 Amp (active state) = 7.2 W
Interface	10/100 BaseT, half/full duplex Rate auto negotiated (802.3 compliant)
Protocols Used by CANOPY	IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP
Network Management	HTTP, TELNET, FTP, SNMP
Non-overlapping Channel	6
Channel Width	20 MHz
Channel Spacing	every 5 MHz
Encryption	DES capable
Latency	5 - 7 msec.
Antenna Gain (dB)	7 dBi
EIRP (dB)	30 dBm
Antenna Beam Width	3dB antenna beam width 60 degrees, Azimuth and Elevation
Mean Time Between Failure (MTBF)	40 yr
Wind	190 km/hr (118 miles/hr)
Operating Temperature	-40C to +55C (-40F - +131F)
Weight	1 lb. (.45kg)
Dimensions	11.75" H x 3.4" W x 3.4" (29.9 cm H x 8.6 cm W x 8.6 cm D)

* ACPS110-03 power supply is required for all AP, SM, and BH units.