801105, This Wilson Bi-Directional 50 dB Amplifier/Repeater greatly improves signal strength inside a building when using your cellular phone. It does this without a physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously.

801105, Wilson Bi-Directional 50 dB Amplifier/Repeater For In-Building (Wilson Part# 801105; replaces 801103)



Wilson Bi-Directional 50 dB Amplifier/Repeater
Wireless Operation - No Physical Connection To Cellphone
Increases Signal Strength In Buildings For AMPS Frequencies
  • Allows multiple phones to be used simultaneously
  • Safer than using your cellphone without an amplifier**
  • Extends the life of your cellphone's battery**
  • Significantly increases your cellphone's range on send and receive
  • Low-cost solution with uncompromised performance
  • Both 50dB and 60dB (HD22860) models are available
  • Works on AMPS frequencies 824-894 MHz (Analog & Digital) (CDMA, TDMA & GSM). Only amplifiers 824 to 894 MHz. 1900 MHz band is unaffected
  • FCC type accepted

This amplifier/repeater greatly improves signal strength inside a building when using your cellular phone. It does this without a physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously.

The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your phone through the inside antenna. When the phone transmits it is received by the inside antenna. It is then amplified/repeated to the cell site through the outside antenna.

Specifications
Frequency 824-894 MHz Uplink
869-894 MHz Downlink
Gain 50dB Uplink
50dB Downlink
Flatness +/- 4dB Uplink
+/- 6dB Downlink
Max RF Output Power +/- 35dB Uplink
+/- 10dB Downlink
Noise Figure 3dB nominal
Uplink Downlink Isolation More than 90dB
Power Consumption 13.8V, 1.5A
Connector N-Female 50 ohms
Dimensions 5.5 x 4.3 x 1.4 (inches) or 14.0 x 10.8 x 3.5 (cm)
Weight 1.32 pounds or 600 grams
Recommended Distance Between Outside Antenna & Inside Antenna 45 Feet
*
The Wilson Cellular Amplifier / Repeater has a better receiver than what's in your cellphone. Its advanced electronics are very sensitive and able to receive small signals which would go undetected by most cellphones. It also has a better transmitter with double the power of your cellphone. This allows your voice to be heard by distant cell sites, increasing coverage up to 50 miles or more.
**
A cellphone using our amplifier is safer and will use less battery power because the phone thinks it's much closer to a cell site than it actually is. Phones vary their power output based on their proximity to cell sites. Therefore, your phone transmits less power - resulting in safer use and longer battery life.

Price: $439.95
Buy Product Online | Visit Store Home
 
Manufactured by Wilson Electronics, Inc.


 Other Items from Cellular Amplifiers

  HD22362 TNC Female/FME Female Barrel Adapter - 
  301119 Dual Band RV/Trucker Roof-Mount Cellular Antenna - 301119 The included mounting hardware is designed to span roofs with large gaps such as the attics found in most RV's.
  804002 Wilson Cellular Wireless Amplifier For Cars, Trucks & RVs; 804002 - 804002 Bi-Directional Amplifier/Repeater For Cars, Trucks & RVs (Nextel/iDEN Frequencies 806-866 MHz).
  814001 Wilson Cellular Direct Connect Nextel Amplifier - 814001 The Wilson Cellular Amplifier has a better receiver than what's in your cell phone. Its advanced electronics are very sensitive and able to receive small signals which would go undetected by most cell phones. It also has a better transmitter which is much more powerful than that in you cell phone.
  301106 Wilson Low Profile Cellular Antenna - 301106 The Wilson Low Profile Cellular Antenna is carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson's innovative design results in high efficiency with low losses and will get the most signal to and from your cellular phone.
  301111 Wilson Yagi Cellular Antenna 800 MHz - 301111 The Wilson Yagi Cellular Antenna is carefully designed to minimize loss and maximize gain on the 800 MHz band. Wilson's innovative design results in high efficiency with low losses and will get the most signal to and from your cellular phone.
  811201 Wilson Cellular Direct Connect Dual Band Amplifier; 811201 - 811201 The Wilson Cellular Amplifier has a better receiver than what's in your cell phone. Its advanced electronics are very sensitive and able to receive small signals which would go undetected by most cell phones. It also has a better transmitter which is much more powerful than that in you cell phone.
  801101 Wilson Bi-Directional Amplifier/Repeater For Cars, Trucks & RVs - 801101 This Wilson Bi-Directional Amplifier/Repeater greatly improves signal strength inside a vehicle without a physical connection to your cellular phone. Increasing coverage up to 50 miles or more (37dB), it even allows mulitple phones to be used simultaneously.
  859901 Wilson Dual-Band 2-Way Splitter - 859901 The Wilson Dual-Band 2-Way Splitter allows you to drive two interior antennas (up to 4 using multiple splitters) with a single amplifier/repeater
  859903 Wilson AC Power Supply Adapter; 859903 - 859903 120VAC Adapter For Wilson Cellular Amplifiers
  859904 12V DC Power Supply for Wilson Mobile Amplifiers; 859904 - 

 

  Return To www.hdwifi.com- Wireless Network Products WiFi Gear, 802.11, WISP, WLAN

 

 

shopping cart
Shopping cart powered by MonsterCommerce ecommerce solutions.