811214, Wilson Wireless SignalBoost Mobile Cellular Signal Amplifier Kit w/Cradle; 811214

Wilson Wireless SignalBoost Mobile Cellular Signal Amplifier Kit with Cradle 811214 / HD26119 The SignalBoost cradle kit accommodates a single user and requires that the cell phone remain in the cradle. Like HD26118, the cradle in this kit accommodates any size cell phone and features muliple mounting options for the dashboard or console of any vehicle. Features Works with all cell phones (except iDEN/Nextel) Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols such as HSDPA, EVDO and EDGE Up to 3 watts maximum output power Power control logic ensures maximum output power is within cellular standards Requires no physical connection to cell phone or data card Provides high signal-to-noise ratio Protects cell sites from harmful interference Dual band - Cellular and PCS FCC and IC type accepted Specifications Frequency 824-894 MHz / 1850-1990 MHz Gain Cell Site Controlled Max Output Power 3 watts (Cell Site Controlled) Max RF +35 dBm / +33 dBm Noise Figure 3.5 dB nominal Flatness ± 2 dB / ± 2 dB Isolation > 50 dB uplink/downlink Power Requirements 12 V DC, 2 A max Connectors FME-Male 50 ohms Dimensions 5 x 3.5 x 1.2 (inches) / 12.7 x 8.9 x 3 (cm) Weight 1.03 lbs / 0.438 kg

 Other Items from Cellular Amplifiers

  HD22362 TNC Female/FME Female Barrel Adapter - 
  301103 Wilson Magnet Mount Cellular Antenna; 10' coax; 301103 - 301103 The Wilson Magnet Mount Cellular Antenna was carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies. Wilson's innovative design results in high efficiency with low losses and will get the most signal to your cellular phone.
  HD22368 Cellular/PCS/Direct Conn/In-Building Bundle - Cellular/PCS (CDMA & TDMA) AMPS/Analog In-Building Bundle
  HD22367 BNC Female/FME Female Barrel Adapter - 
  HD22303-20 N Male to FME Female; 20 Ft. LMR-195 - 
  HD22394 Wilson Cellular Phone Adapter (Wilson Part# 356503) - 
  301102 Wilson Glass Mount Cellular Antenna; 14' coax; 301102 - 301102 The Wilson Glass Mount Cellular Antenna was carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies. Wilson's innovative design results in high efficiency with low losses and will get the most signal to your cellular phone.
  301113 Wilson Mini Magnet Mount Cellular Antenna; 10' coax; 301113 - 301113 The Wilson Magnet Mount Cellular Antenna was carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies. Wilson's innovative design results in high efficiency with low losses and will get the most signal to your cellular phone.
  301121 Wilson Cellular Dual-Band & Tri-Mode Dome Antenna (for interior use); 301121 - 301121 800 MHz Analog & Digital; 1900 MHz Digital
  DA4KMR-30U Mobile Repeater System: Boat, RV, Home, Office; DA4KMR-30U - DA4KMR-30U 3-Watt 38dB Gain Dual Band Wireless Cellular Amplifier/Repeater System For Boats, RVs, Home, Office Use.
  DA4KMR-10A Mobile Repeater System: Automobiles; DA4KMR-10A - DA4KMR-10A 3-Watt 38dB Gain Dual Band Wireless Cellular Amplifier/Repeater System For Automobile Use.