| SPECS: |
| Input (AC Input Voltage Range) |
90 to 264VAC |
| AC Input Voltage Rating |
100 to 240VAC |
| AC Input Current |
4.5A (RMS) max. for 90VAC
2.25A (RMS) max. for 240VAC |
| Leakage Current |
3.5mA max. @ 254VAC 60Hz |
| AC Input Frequency |
47-63Hz |
| AC Inrush Current |
15A(RMS) max. for 11 5VAC
20A(RMS) max. for 230VAC
|
| Total Output Power |
15.4W per port |
| Ripple and Regulation |
Meets requirements of IEEE802.3af |
| Efficiency |
75% (typical) at Max. load, and 120VAC 60Hz |
| Hold-up Time |
16mS min. 120VAC and max. load |
| Transient O/P Voltage Protection |
60V max. at switch on and off at any AC line Phase |
| Turn-On Delay Time |
3 sec max. at max. load, and 120VAC 60Hz, 25Hz |
|
| ENVIRONMENTAL: |
| Temperature |
| Operation |
| Non-operation |
|
| Temperature |
| 0 to +40°C |
| -25 to +65°C |
|
| Humidity |
| Operation |
| Non-operation |
|
| Temperature |
| 5 to 90% |
| 5 to 90% |
|
| EMC |
FCC Class B
EN55022 Class B |
| Isolation Test |
Primary to Secondary: 3000VAC for 1 minute
Primary to Ground: 1500VAC for 1 minute
Secondary to Ground: 1500VAC for 1 minute
|
| Immunity EN50082-1 |
| ESD |
| RS |
| EFT |
| Surge |
| CS |
| Voltage Dips |
| Harmonic |
|
| Temperature |
| EN61000-4-2. Level 3 |
| EN61000-4-3. Level 2 |
| EN61000-4-4. Level 2 |
| EN61000-4-5. Level 3 |
| EN61000-4-6. Level 2 |
| EN61000-4-11 |
| EN61000-3-2 Class A |
|
| IEEE 802.3af Interoperability |
UNH Interoperability report available on request |
|
| OTHER FEATURES: |
| Cisco Legacy detection |
No extern parts required for Legacy devices
VoIP Phones: 7910,7912,7940,7960
Access Points: 350,1100,1200
|
| Over Voltage/Current, Short Circuit Protection |
Outputs equipped with short circuit protection and overload protection as per 802.3af specification The output can be shorted permanently without damage
|
| Over Temperature Protection |
Shutdown automatically without damage
|
| Indicators |
Led #1 indicator for detection power "on" - Green
Led #2 Indicator for fault - Yellow
|
| USB Diagnostics Port |
USB “B” port for diagnostics and manual port control
Windows GUI
|
| Input Connector |
IEC320 inlet 3 pin
|
|
|