HD26106, Twin Antenna Bundle - Two (2) 7dBi RP-TNC 2.4 GHz Rubber Duck Antennas; Replaces HGA7T for Linksys WAP11, WAP54, WRT54G, and Engenius ECB3500

HD26106, Twin Antenna Bundle - Two (2) 7dBi RP-TNC 2.4 GHz Rubber Duck Antennas; Replaces HGA7T for Linksys WAP11, WAP54, WRT54G, and Engenius ECB3500



HD26106
Twin antenna bundle - (2) Two 7dBi RP-TNC 2.4 GHz Rubber Duck Antennas is a replacement for the lower gain Linksys HGA7T kit, and Engenius ECB3500 antennas

High Gain Antenna Kit for RP-TNC Connectors,
Increase the range of your Wireless network! Attach these high gain antennas to your Linksys Wireless Broadband Router or Access Point, or any other RPTNC connector device and increase both the effective strength of the outgoing signals, and the receive sensitivity for incoming signals.

The added signal strength and sensitivity also improves close-range communication reliability because every packet comes through "loud and clear", reducing retransmissions due to weak signal reception errors. To install, just unscrew your current antennas, and attach the High Gain antennas in their place. There are no drivers to install, and no modifications to your setup are necessary.

This High Gain Antenna Kit saves wiring costs and helps to build corporate wireless infrastructure by driving stronger signals into distant corners and hard-to-reach areas. And it is perfect for covering large areas in warehouse environments, public spaces, wireless hotspots, and outdoor venues -- anywhere you need extra coverage for your wireless network.

Includes Two high gain antenna for RP-TNC connectors

  • Works with WRT54GS, WRT54G (prior to version 8), WAP54G, BEFW11S4, WAP11
  • Increases the effective range of Linksys wireless devices.
  • Works with both Wireless-G and Wireless-B devices.
  • Stronger signal increases wireless coverage into hard-to-reach areas and improves throughput by reducing retransmissions.
  • Easy installation -- simply replace your current antennas.

SPECIFICATIONS

  • GAIN - 7 dBi
  • FREQ. RANGE - 2.4 GHz ~ 2.5 GHz
  • VSWR - 1.92 Max. (Voltage Standing Wave Ratio)
  • POLARIZATION - Linear Vertical
  • DIRECTION - Omni-directional
  • IMEDANCE - 50 ohms Nominal
  • CONNECTOR - Reverse TNC
  • ENVIRONMENTAL- Operating Temperature: -4 ~ 149 degrees F
  • Storage Temperature : -22 ~ 167 degrees F
  • Operating Humidity : 0 ~ 85% Non-Condensing
  • SIZE - 11.22"w x 0.55"h WT.- 1.48 oz.

Price: $39.99
Buy Product Online | Visit Store Home
 
Manufactured by HD Communications Corp.

  Related Products


  ECB 3500, (ECB3500) 802.11B/G Indoor High Power 2000mW (2 Watt EIRP) AP/Client Bridge/Repeater/Router; ECB-3500, Fixes Most WiFi Range Problems! "The Pumpkin", HD27010 - ECB 3500, (ECB3500) 802.11B/G Indoor High Power 2000mW (2 Watt EIRP) Fixes Most WiFi Range Problems! AP/Client Bridge/Repeater/Router; ECB-3500, HD27010
  Linksys Access Point WAP54G, WAP 54G -  WAP54G Wireless Access Point; data rates up to 54Mbps - 5 times faster than Wireless-B (802.11b). Also interoperates with Wireless-B networks (at 11Mbps). Advanced wireless security with 128-bit WEP encryption and MAC filtering.


 Other Items from HD26106

  HD26106, Twin Antenna Bundle - Two (2) 7dBi RP-TNC 2.4 GHz Rubber Duck Antennas; Replaces HGA7T for Linksys WAP11, WAP54, WRT54G, and Engenius ECB3500 - HD26106, Twin Antenna Bundle - Two (2) 7dBi RP-TNC 2.4 GHz Rubber Duck Antennas; Replaces HGA7T for Linksys WAP11, WAP54, WRT54G, and Engenius ECB3500

 

  Return To www.hdwifi.com- Wireless Network Products WiFi Gear, 802.11, WISP, WLAN

 

 

powered by MonsterCommerce shopping cart
E-commerce powered by MonsterCommerce shopping cart.