PowerMax DA4000SBR 3 Watt 60dB Mobile Repeater System: Large Yachts, RVs, Homes, Offices; DA4KSBR-50U

3 Watt 60dB Gain Dual Band Wireless Cellular Amplifier / Repeater
For use in large yachts, RVs 40' length or greater, homes and offices
Includes the PowerMaxTM DA4000SBR

Works with AMPS/TDMA/PCS/CDMA/GSM 850/GSM1900/GPRS (Dual Band & Tri-Mode) such as Verizon, Cingular, AT&T, Sprint, Alltel, and T-Mobile (800 - 1900 MHz); not for use with Nextel phones. For our cellular amplifier solutions that work with Nextel service, see HD22278 (in-building solution) or HD22277 (in-vehicle solution).

You can now speak and be heard clearly on a cell phone inside marine vessels, RVs, homes and offices without feeling tied down. Digital Antenna’s PowerMax DA4000SBR increases signal strength and improves cellular communication without a physical connection to cell phone. This amplifier/repeater also boosts the performance and range of your cell phone up to 50 miles.

Please Note: Digital Antenna, Inc. cellular amplifier/repeaters, and antennas MUST be installed properly. In addition to following the included setup instructions that accompanies this equipment, we urge you to review our technical FAQ page before buying so you may understand all installation requirements. HD Communications Corp. is not responsible for improperly installed equipment.

Download the (.pdf) manual for this kit.

System Includes:

DA4000SBR 3W dual band 60dB gain wireless amplifier/repeater unit
12VDC power converter
110VAC power supply
Inside omni-directional antenna with 6’ cable*
Outside 9dB gain omni-directional dual band cell antenna and mounting bracket*
50’ PowerMax DA340 ULTRA low loss coaxial cable and factory attached connectors

Requires a minimum separation distance of 40’ or more, and wall/roof/bulkhead structures between inside and outside antennas (see HD22468 or HD22469 which requires less antenna separation). This system is not for use in cars, open console boats, RVs less than 40’ length or in open air without a roof/wall structure.

Benefits:

Wireless - no connections to cell phone
Increases cell phone range up to 50+ miles
Amplifies 800 and 1900 MHz bands
Use multiple cell phones and carriers at the same time
Reduces dropped calls
Up to 5,000 sq. ft. coverage area†
Extends the life of your cell phone battery

Stay Connected . . . Wirelessly!
The DA4000SBR requires no physical connection to your phone. How does this work? An outside antenna receives the signal from the cell tower, the signal is amplified by the DA4000SBR unit and repeated to your cell phone through the inside antenna. No physical connection to your phone means you now have the freedom to walk around while talking on your phone. This technology even allows clean and clear wireless functioning of multiple cell phones operating on 800 and 1900MHz bands simultaneously, with a coverage area up to 5,000 square feet.†

†	Coverage area is based upon an outside signal strength of -70dB. As outside signal strength decreases, coverage area decreases. For poor outside signal areas or for increased interior coverage, use a yagi (directional) antenna.

Complete Systems are Easy to Install
The DA4000SBR is sold as a complete system with everything you need for no hassle installation on your yacht, or inside your RV, home or office. This innovative design offers patent pending Dynamic Variable Gain control and amplification of transmit and receive signals. A minimum separation of 40’ is required between the inside and outside antennas*. The DA4000SBR is the only FCC approved amplifier/repeater for use with all cell carriers in the USA and Canada, including Cingular, AT&T, Verizon, Sprint, Alltel and T-Mobile.

DA4000SBR can be used with all 800 and 1900 MHz digital cell phones and tri-mode phones operating on CDMA, TDMA, PCS, GSM850/1900, GPRS and AMPS.

General Specifications:
FCC approved, FCC ID	PZODA4000SBR
Industry Canada approved, IC ID	4260A-DA4000SBR
Repeater Dimensions	4.5" l x 4.0" w x 1.25" h (114mm x 102mm x 32mm)
Weight	12 oz (.345 kg)
Power Supply	5 VDC 1.5A
Internal Fuse	3A
RF Connections	Outside Antenna Port: Mini-UHF Female Inside Antenna Port: Mini-UHF Female
DC Power	Coaxial ID = 2.5mm, OD = 5.5mm (center positive)
RF Connectors	On Cable: Mini-UHF Male and N-type Male On Antenna: N-type Female
Indicator	Tri-color LED indicating power on
Power Switch	Slide switch toward LED = ON


Electrical Specifications:
Frequency	Uplink: 824-849 MHz and 1850-1910 MHz Downlink: 869-895 MHz and 1930-1990 MHz
Supports	AMPS/TDMA/PCS/CDMA/GSM850/GSM1900/GPRS
Max Output Power	3W, 35 dBm (824-849 MHz) 2W, 33 dBm (1850-1910 MHz)
Dynamic Variable Gain	60dB Max
Impedance	50 ohms
Power Consumption	Standby 5 vdc/0.35A Uplink 5 vdc/2.0A
One year warranty. Made in the USA