TR-6015 Tranzeo ALL-IN-ONE 2.4GHz Wireless AP/CPE/PtP w/23dBm Radio, 15dB Ant; POE; TR-6015f

"We're in a very competitive environment here in Utah with at least 7 other competitors in the areas that we service so we see a huge amount of spectrum garbage and the Tranzeo radios have handled it gracefully. We also live in an area that sees 105 degrees in the summer and -40 degrees in the winter. Of course there have been problems but one of Tranzeo's best qualities is that they are always quick to respond when there's a problem and they get someone working on it right away. We've never had more than a few hours downtime through lightning strikes, subzero temperatures and just about anything else that you can think of."

Jamie Locke
Park City, UT

HD22950 (TR-6015f)
ALL-IN-ONE 2.4GHz Wireless AP/CPE/PtP with 23dBm radio, 15 dB Antenna, and POE

Tranzeo is pleased to announce our all new TR-60xxf Series 2.4 GHz radio. These integrated fully functioning radios can be configured as an Access Point, a Point to Point bridge, or a Client Adapter ( CPE).

All New Overall Features: Dual Ethernet Ports

This allows you to daisy-chain radios at your installation sites (depending on power requirements). Great for installing peripheral Power over Ethernet devices like weather monitoring or security cameras.

More Robust Routing Features: Tunneling Protocol Support

Includes support for tunneling protocols such as VPN, PPTP, RSA, etc.

Low Power Requirements

Excellent for solar and other alternative power source installations. TR-60xxf Series requires only 5.5 Watts.

All New Access Point Features: Wireless Distribution System (WDS)

WDS allows Access Points to be wirelessly connected to each other while also servicing clients.

Wi-Fi Protected Access (WPA)

WPA improves on the security features of WEP. It includes improved data encryption and user authentication.

WPA and WEP LEDs

Outside LEDs allow you to easily see if WEP or WPA is activated on your Access Point.

All New Client Adapter (CPE) Features: Alignment LEDs

Now you can align your client and point to point installations without having to log into the radio. Get visual signal strength at a glance by using this great new feature.

Controllable High Gain Output

All radios have 23dBm maximum output. Great for long distance client applications. Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

Not all channels approved for use in all areas.

Features:

Standard

802.11b

Frequency Range

2401 MHz to 2483.5 MHz

Radio Mode

Access Point / Point to Point / Customer Premise Equipment

Data Range & Modulation

11 Mbps & 5.5 Mbps CCK, 2 Mbps DQPSK, 1 Mbps DBPSK

Communication Method

Half-Duplex

Transmit Power

+23dBm max

Receiver Sensitivity

-85dBm @ 11Mbps, -90dBm @ 1Mbps

Polarization

Horizontal or Vertical

Antennas:

Model	Type	Wind Load (N)		Beamwidth
Model	Type	100 mph	125 mph	Horizontal	Vertical
HD22950 (TR-6015f)	15dB Panel (Internal)	100	160	20°	33°

Management:

Remote Configuration

Based on IP Address

Device Management

Windows Utility, Web-Based Management

Protocol Supported

TCP/IP

Security

40 bits and 128 bits WEP encryption, Media Access Control address filter (MAC), WPA

Ethernet Connector

10/100 base T (Water Tight RJ-45)

Operating Temperature

-65°C to +70°C

Warranty

2 Year Through Manufacturer*

Dimensions

13" X 10" (radio only)

Power Supply:

Standard

AC Wall Plug
Input: 120V 60Hz
Output: 18V, 1000mA

Optional

AC Wall Plug
Input: 120V 60Hz
Output: 24V, 1000mA

Samlex Switching Power Supply (for daisy chain application)
Input: 120V 60Hz
Output: 24V, 7A

Click here for product installation manual (.pdf)
Or click here for Tranzeo support pages

Specifications are subject to change without notice
Subject to local regulations
*See Tranzeo website for support and warranty details.