TR-902-H12f Tranzeo 900 MHz Wireless AP/CPE/PtP, 12 dBi Hor Sector Ant, PoE; TR-902-H12f

"We're in a very competitive environment here in Utah with at least 7 other competitors in the areas that we service so we see a huge amount of spectrum garbage and the Tranzeo radios have handled it gracefully. We also live in an area that sees 105 degrees in the summer and -40 degrees in the winter. Of course there have been problems but one of Tranzeo's best qualities is that they are always quick to respond when there's a problem and they get someone working on it right away. We've never had more than a few hours downtime through lightning strikes, subzero temperatures and just about anything else that you can think of."

Jamie Locke
Park City, UT

HD24177 (TR-900-H12f)
Kit contains a wireless 900 MHz AP/PtP/CPE with 12dBi Horizontal Sector Antenna, PoE, Boot-Cover, Mounting Kit, and cable pigtail with connectors.

Tranzeo is pleased to announce their TR-900 Series 900 MHz products. These units can be configured as an Access Point, a Point to Point bridge, or a Client Adapter (CPE).

All New Overall Features: Dual Ethernet Ports

This allows you to daisy-chain radios at your installation sites (depending on power requirements). Perfect for back to back point to point scenarios. Also great for installing peripheral Power over Ethernet devices like weather monitoring or security cameras.

More Robust Routing Features Tunneling Protocol Support

Includes support for tunneling protocols such as VPN, PPTP, RSA, etc.

Low Power Requirements

Excellent for solar and other alternative power source installations. TR-900 Series requires only 7 Watts.

All New Access Point Features: Wireless Distribution System (WDS)

WDS allows Access Points to be wirelessly connected to each other while also servicing clients.

Wi-Fi Protected Access (WPA)

WPA improves on the security features of WEP. It includes improved data encryption (AES) and user authentication.

WPA and WEP LEDs

Outside LEDs allow you to easily see if WEP or WPA is activated on your Access Point.

All New Client Adapter (CPE) Features: Alignment LEDs

Now you can align your client and point to point installations without having to log into the radio. Get visual signal strength at a glance by using this great new feature.

Controllable High Gain Output

All radios have 13dBm of output. Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

Features:

Standard

802.11b/g

Frequency Range

905 MHz to 925 MHz

Radio Mode

Access Point / Point to Point / Customer Premise Equipment

Communication Method

Half-Duplex

Transmit Power

+25dBm max

Receiver Sensitivity

-70dBm @ 54Mbps, -90dBm @ 6Mbps

Polarization

Horizontal or Vertical

Antennas:

Model	Type	Wind Load (N)		Beamwidth
Model	Type	100 mph	125 mph	Horizontal	Vertical
HD24177 (TR-900-H12f)	12dBi Horizontal Sector (external)	396	619	120°	15°

Management:

Remote Configuration

Based on IP Address

Device Management

Windows Utility, Web-Based Management, , SNMP (MIB-II and 802.11 mib compliant)

Protocol Supported

TCP/IP

Security

40 bits and 128 bits WEP encryption, Media Access Control address filter (MAC), WPA encryption

Ethernet Connector

10/100 base T (Water Tight RJ-45)

Operating Temperature

-65°C to +60°C

Warranty

2 Year Depot

Dimensions

13" x 10-1/8" (radio only)
62" x 8" x 2" (antenna only)

Power Supply:

Standard

AC Wall Plug
Input: 120V 60Hz
Output: 18V, 1000mA

Optional

AC Wall Plug
Input: 120V 60Hz
Output: 24V, 1000mA

Specifications are subject to change without notice
Subject to local regulations